flexure造句
- 1. The flexure wave is a basic wave.
- 弯曲波是其基本模。
youdao
- 2. Analysis of flexure dynamics and study of its control method.
- 挠性卫星动力学模型分析及其控制方案研究。
youdao
- 3. Of or relating to the sigmoid flexure in the large intestine.
- 属于或关于大肠内乙状结肠。
youdao
- 4. For testing the tensile strength and flexure strength of wire.
- 用于检测金属线材的抗拉强度，及弯曲试验。
youdao
- 5. During left LPN, the spleen, splenic flexure and pancreas are reflected medially.
- 在左侧lpn中，脾脏，结肠脾曲以及胰腺应使其倒向内侧。
youdao
- 6. This feature is useful in solving center flexure as well as mitigating camber of product.
- 这一特征有助于解决中心弯曲以及减轻产品的弯度。
youdao
- 7. The flexure inherently induces a change in pitch angle in accordance with a change in flap angle .
- 柔性本质上诱导的改变，俯仰角，在按照改变在皮瓣的角度来看。
youdao
- 8. This paper aims at three typical flexure hinges, and analyzes the nonlinearity of the flexure hinges.
- 以三种常见的柔性铰链作为研究对象，对柔性铰链进行非线性分析。
youdao
- 9. Objective To study the surgical treatment of duodenal invasion by cancer of hepatic flexure of (colon).
- 目的探讨结肠肝曲癌侵犯十二指肠的治疗方法。
youdao
- 10. The flexure of claim 1 wherein a positive change in flap angle produces a negative change in pitch angle .
- 柔性索赔1其中了积极的变化，在皮瓣的角度产生负面的变化俯仰角。
youdao
- 11. The methodology presented in Part I is employed to deal with flexure and free vibration of anisotropic plates.
- 把本文第一部分建立的方法用于求解各向异性板的弯曲问题和振动问题。
youdao
- 12. They were formed through regional isostatic adjustment and Theological flexure under the load of fold-thrust belts.
- 它是在褶皱冲断带负载的作用下，岩石圈通过区域性均衡调整及流变挠曲而形成的。
youdao
- 13. The RCE flexure hinge is suitable for engineering applications where high displacement and high accuracy are needed.
- 设计的直圆椭圆复合柔性铰链非常适合于需要大位移、高精度传动的应用场合。
youdao
- 14. The full-range curve of reinforced concrete members with flexure and axial loads is obtained by finite element method.
- 用有限元法对钢筋混凝土压弯构件进行了荷载一位移曲线的全过程分析。
youdao
- 15. At least one flexure joint is provided in the grating mount which permits thermal expansion and contraction of the substrate.
- 在光栅固定件中至少设置一个挠曲连接部，它允许基片热膨胀和收缩。
youdao
- 16. The values are strength parameters under fixed flexure rather than max. Strength according to the latest testing standard of1998.
- 改值为定挠度下的强度值，不是最大的强度值，根据1998年的最新测试标准。
youdao
- 17. The influence of incidence Angle, blade's flexure Angle and exit conditions on the effect of positive blade flexure is discussed.
- 讨论了冲角、叶片弯曲角和出口条件对叶片正弯曲作用的影响。
youdao
- 18. The values are strength parameters under fixed flexure rather than Max. Strength according to the latest testing standard of 1998.
- 改值为定挠度下的强度值，不是最大的强度值，根据1998年的最新测试标准。
youdao
- 19. And it also presented the rotation compliance equation of right circular double-axis flexure hinge which is popular used flexure hinge.
- 在此基础上得到了常用的直圆双轴柔性铰链转动柔度的设计计算公式。
youdao
- 20. A design method of micro-displacement amplifier in a novel piezoelectric servo was proposed based on stiffness analysis of flexure hinges.
- 针对一种新型压电舵机的微位移放大机构，提出一种基于刚度分析的设计方法。
youdao
- 21. The influence of compounding polypropylene fiber and expansion on flexure strength, impermeability and the shrinkage deformation is studied.
- 研究了聚丙烯纤维和微膨胀复合对混凝土抗折强度、抗渗性和收缩变形的影响。
youdao
- 22. The Mesozoic rapid tectonic subsidence and wedge shaped sedimentary bodies indicate the origin of lithospheric flexure in the Chuxiong Basin.
- 中生代构造快速沉降的沉积体的楔形展布表明盆地具有前陆岩石圈挠曲成因特征；
youdao
- 23. Theory calculate and finite element method to symmetric conic-section flexure hinges is used to compare and analyze their dynamics characteristic.
- 通过对四种二次曲线截面的柔性铰链的理论计算和有限元分析，比较分析了它们的力学特性。
youdao
- 24. The fracture toughness of the composite was increased 62% with little decrease of flexure strength when compared with mullite monolithic ceramics.
- 与块体莫来石陶瓷相比，在保证材料强度降低较小的情况下断裂韧性提高了62%。
youdao
- 25. In this article, the mechanical of the HRB400 Reinforced Concrete Members under flexure, shear and plastic internal force redistribution is studied.
- 本文主要研究了HRB400级钢筋混凝土构件的受弯、受剪及连续梁塑性内力重分布性能。
youdao
- 26. The checkout error of distortion and flexure caused by tapers of crank bore and piston pin eye is analysed. The solution for this problem is put forward.
- 针对一般采用的几种连杆弯曲和扭曲测量方法，就连杆大小端孔锥度造成的测量误差进行了分析，并提出了解决途径。
youdao
- 27. The stresses produced by continual movement, and even intense noise, cause fatigue, the cracking and breaking that occurs in metals under constant flexure.
- 持续的运动甚至是强烈的噪音产生的应力会导致疲劳、不断弯曲的金属出现的裂缝和破损。
youdao
- 28. To use WD-10A all-powerful material test machine and XJ-4 nonmetal material impact instrument to measure flexure strength and impact strength of denture base.
- 用WD - 10 A型万能材料试验机和XJ - 4型非金属材料冲击试验机测试义齿基托的挠曲强度和冲击强度。
youdao
- 29. A group of hybrid flexure hinges with different corner filleted radius are analyzed using finite element method, and their flexibility stress ratios are achieved.
- 通过有限元方法，分析了一组不同导角半径的混合铰链设计实例，并得到其柔度应力比值。
youdao
- 30. By analysing and discussing the ductility of reinforced concrete beams under flexure, the author gives formula for calculating curvature ductility index of section.
- 本文对钢筋砼受弯构件的延性进行分析和讨论，提出了截面曲率延性系数的计算公式。
youdao