去查网 logo

collinear造句

1. Hayes solves the problem of determining whether three points in a plane are collinear.
Hayes解决了如何确定一个平面上的三个点是否在一条直线上的问题。

youdao

2. Figure 4-47 is a diagram of four-point collinear probe setup for resistivity measurements.
图4 -47是四点同线探针用于电阻率测量的配置图。

youdao

3. Figure 4-47 is a diagram of four - point collinear probe setup for resistivity measurements.
图4 -47是四点同线探针用于电阻率测量的配置图。

youdao

4. This paper introduces a kind of device that can transfer collinear telephones automatically.
本文介绍了一种同线电话自动转接装置。

youdao

5. The coaxial collinear printed dipole structure used to improve gain and arrays with good coherence.
采用新型同轴直排印刷振子天线结构,易于提高增益和组阵,具有良好的一致性。

youdao

6. Pascal's Theorem points of intersection of opposite sides a hexagon inscribed in a conic are collinear .
帕司卡定理:给定一个圆上的六边形,则此六边形三对对边直线的交点在同一直线上。

youdao

7. Most measurement methods are under the non - collinear geometry and have many limitations in applications.
绝大多数测量方法都是在非共线几何结构下测量的,在实际应用中有很大的局限性。

youdao

8. It's unavoidable that collinear and non collinear interactions in the process of optical parametric generator.
光学参量产生过程中,必然存在共线和非共线光波相互作用。

youdao

9. A point on one line, its corresponding point on the other line, and the center of perspectivity are collinear.
一条直线上的一个点,它在另一条直线上的对应点以及透视中心这三个点共线。

youdao

10. Secondly, the control system structure and station keeping problems near collinear Lagrange points are studied.
研究了编队飞行的控制系统结构和共线拉格朗日点附近的周期轨道保持控制问题。

youdao

11. The two-way cooling structure only brings little effects to joint cavities of accelerating tube and collinear load.
而分路冷却只会对加速段和同轴负载耦合处的腔体略有影响。

youdao

12. The collinear load can bring convenience to fix the focus coils and cooling system and enhance the quality of beam.
同轴负载结构的实现可使聚焦线圈和加速管冷却系统的安装变得方便,使束流品质得以提高。

youdao

13. In this dissertation, low energy trajectory design and optimization for collinear libration point missions is studied.
本文对共线平动点任务节能轨道设计与优化进行了研究。

youdao

14. The coaxial collinear printed dipole structure can be easily used to improve gain and form arrays with good coherence.
采用新型同轴直排印刷振子天线结构,易于提高增益和组阵,具有良好的一致性。

youdao

15. Mechanical model is established for collinear multiple unequal cracks in transversely isotropic piezoelectric material.
建立了横观各向同性压电材料中的共线非等长多裂纹模型。

youdao

16. By analyzing collinear equation and adopting absolute orientation method, the stereo pair of photos is relatively oriented.
通过解析共线条件方程式,利用相对定向直接法进行像对的相对定向。

youdao

17. The torsion and spin-density-functional theory (SDFT) was given by adding torsion fields to the non-collinear magnetic system.
将挠率场应用于非共线系统得到了适用于非共线磁系统的挠率-自旋-密度泛函理论(TSDFT)。

youdao

18. Longitudinal shear problems of collinear periodical rigid line inclusions at the interface of dissimilar materials were dealt with.
研究了不同材料界面含周期刚性线夹杂的纵向剪切问题。

youdao

19. Continuously tunable UV radiation is obtained by collinear doubling and non-collinear mixing from visible radiation of pulsed dye laser.
脉冲染料激光器的可见光波段辐射通过共线倍频和非共线混频实现紫外波段的连续可调谐输出。

youdao

20. Futhermore, the interaction of the singular stress field between, two initially closed collinear cracks is also studied by photoelasticity.
探讨了压剪闭合共线双裂纹之间奇异应力场的相互作用。

youdao

21. The main task of the subject is to research and realize a collinear load which can replace dry load and make accelerator structure compact.
本课题的主要任务就是探索和研究一种能够替代干负载的同轴负载结构,以使加速器结构紧凑、横向体积小。

youdao

22. In this paper, a boundary integral equation method is applied to compute the dynamic stress intensity factors of collinear periodic antiplane cracks.
本文采用一种边界积分方程法,计算了共线周期反平面裂纹的动应力强度因子。

youdao

23. Results show that iterative refinement using the SVD can improve regression coefficient estimates in the cases where the design matrix is highly collinear.
结果表明,在设计矩阵高度共线性时,用奇异值分解的迭代加细可以改进回归系数的估计。

youdao

24. The characteristics of the potential energy surface in the region far away from the collinear geometry have a large influence on the title reaction dynamics.
势能面上远离共线型构型的区域特征对此反应的动力学有着较大的影响。

youdao

25. With some examples in plane geometry, the author indroduces how to use Desargues theorem to simplify the proofs of problems of collinear points and concurrent lines.
利用代沙格定理及其逆定理 ,对平面几何的几个共线点和共点线的问题给出简捷的证法。

youdao

26. Orbits of this type can be positioned near collinear libration points, and for simplicity it is adequate to take linear terms into consideration in the control process.
这种类型的轨道可以离共线平动点较近,那么只需要在控制过程中考虑线性项即可,控制条件简单。

youdao

27. The present paper focuses on the simple case of collinear microcracks, and quantifies the influence by the statistical distribution of crack lengths and ligament sizes.
本文研究简单的共线微裂纹构型,确定由于微裂纹长度和韧度尺寸的统计分布所产生的影响。

youdao

28. For collinear collision, the preceding collision velocity and post collision velocity are calculated on the basis of the impact locality and stop locality of collision vehicle.
对于二维碰撞,可以根据车辆的碰撞位置和停止位置,反推计算出车辆碰撞后的分离速度和碰撞前的接触速度。

youdao

29. Based on the invariance of cross-ratio and the collinear property of all points for one dimensional target, a global calibration method of multi-vision sensor system is proposed.
基于交比不变性原理和一维靶标点共线的特点,提出了一种多视觉传感器全局校准方法。

youdao

30. Based on the invariance of cross-ratio and the collinear property of all points for one dimensional target, a global calibration method of multi-vision sensor system is proposed.
基于交比不变性原理和一维靶标点共线的特点,提出了一种多视觉传感器全局校准方法。

youdao

按拼音查造句

全部查询工具

关于我们免责声明联系我们网站地图最近更新

免责说明:本站为非营利性网站,本站内容全部由《去查网》从互联网搜集编辑整理而成,版权归原作者所有,如有冒犯,请联系我们删除。

Copyright © 2020 - 2024 quchaw.com All rights reserved.浙ICP备20019715号